RETURN POLICY

Unless otherwise specified our filament is not returnable after purchase, please ensure you choose the correct size, colour and weight.

ASA

(2.85mm/1.75mm)

Natural

     R590.00

Choose Diameter:

Technical information:

Acrylonitrile-Styrene-Acrylate (ASA) polymers are amorphous and have mechanical properties similar to those of ABS plastics. However, the ASA properties are far less affected by outdoor weathering. The outstanding weather resistance abilities of ASA is due to the acrylic ester elastomer. ASA parts have good chemical and heat resistance, and high impact strength, even at low temperatures. Typical ASA applications are buiding/construction, automotive and recreation parts.

The 3D4MAKERS ASA Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ASA filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS ASA Filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

Moisture content

Size

1,75 mm Filament

2,85 mm Filament

Description

Density

Description

 

Tensile Stress

Flexural Modulus

Impact strength Notched Izod

Measurements & Tolerance

< 0,05%

 

Diameter tolerance

+/- 0,05mm

+/- 0,05mm

Physical properties

Value

 

1,07 g/cm3

Mechanical properties

Value

 

47 Mpa

2210 Mpa

180 Kj/m²

ASA Data Sheet

 Roundness

 

99%

99%

Test Method

 

ASTM D792

Test Method

 

ASTM D638

ASTM D790

ASTM D256

  • Facebook Basic Black

© 2019 Berg3D Printing 

Contact Theo: 

Theo@berg3dprinting.co.za | Morehill,  Benoni, Johannesburg, South Africa | +2782 842 9725/+27 84 276 5386 |