Facilan C8 - 1.75MM / 2.85MM
3D Printed Facilan C8 toilet
FacilanC8 3DPrinting MaterialExtru
Facilan_GD_large
Facilan_Figurine_large

facilan c8

(2.85MM)

 R890.00

Choose Diameter:

Information:

RETURN POLICY

Unless otherwise specified our filament is not returnable after purchase, please ensure you choose the correct size, colour and weight.

3D4MAKERS Facilan™ C8 is a new compostable 3D printing material designed to be a true manufacturing material for 3D printing.

Facilan™ C8 is the first product of the Facilan™ family used to create industrial, consumer friendly printed parts as well as high end prototypes for businesses. The first Fifth Generation 3D printing material, Facilan™ C8 has fantastic mechanical qualities and high tolerances that combine to make a material suited for high throughput and high repeatability production in Additive Manufacturing.

Facilan™ C8 has been designed, built and manufactured to outperform: C8 is the 3D printing material you’ve always dreamt of.

Facilan™ C8:

  • has higher impact strength than ABS.

  • has higher tensile strength than ABS.

  • is tougher than PLA.

  • is compostable at home.

  • has a luxuriously soft touch feel.

  • has the best layer adhesion properties of any FDM material.  

  • has the best surface quality of any FDM material.  

  • Products should be smooth with an even matte surface finish.

  • On most 3D printers there should be no visible layers in products 3D printed with Facilan™ C8.

For many 3D printers C8 will print best at approximately 200°C with a bed temperature of  50°C and a speed of 50 mm/s. In designs with significant overhangs and bridges best results are obtained with fans at 80%. If your model has no overhangs then putting your fans at 0% improves interlayer bonding and in so doing the final mechanical strength of your part.

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun.

When the 3D printer is not being used it is important to keep the 3D4MAKERS C8 Filament in a bag and stored in a cool, dry and dark place until it is used again.

Facilan C8 Data Sheet
  • Facebook Basic Black

© 2019 Berg3D Printing 

Contact Theo: 

Theo@berg3dprinting.co.za | Morehill,  Benoni, Johannesburg, South Africa | +2782 842 9725/+27 84 276 5386 |