RETURN POLICY

Unless otherwise specified our filament is not returnable after purchase, please ensure you choose the correct size, colour and weight.

PLA

(2.85mm/1.75mm)

     R550.00 

Choose Diameter:

Technical information:

PLA Filament (Polylactic Acid) is a biodegradable plastic coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants.
Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.25 kg/cm3. The glass temperature is typically around 50 °C and it as a melting temperature between 170 and 230 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable.

The 3D4MAKERS has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.


The PLA Filament produced by 3D4MAKERS meets the European regulations EC No. 1935/2004, EC No. 2023/2006 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The colorants used by 3D4MAKERS to colour the Filament also meet these European regulations.

water during the production process and is directly packaged in a vacuum packaging.

Moisture content

Size

1,75 mm Filament

2,85 mm Filament

Description

Density

Description

 

Tensile Stress

Flexural Modulus

Impact strength Notched Izod

Measurements & Tolerance

< 0,05%

 

Diameter tolerance

+/- 0,05mm

+/- 0,07mm

Physical properties

Value

 

1,24 g/cm3

Mechanical properties

Value

 

45 Mpa

2300 Mpa

19 Kj/m²

PLA Data Sheet

 Roundness

 

99%

99%

Test Method

 

D1501

Test Method

 

D882

D882

D882

  • Facebook Basic Black

© 2019 Berg3D Printing 

Contact Theo: 

Theo@berg3dprinting.co.za | Morehill,  Benoni, Johannesburg, South Africa | +2782 842 9725/+27 84 276 5386 |